FB17 White Adhesive

Description

Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. moistening primer should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
15 kg of powder is mixed with 3.9-4.5 liters of cold clean water.
5 kg of powder is mixed with 1.5-1.6 liters of cold clean water.

Technical data:
Class according to EN 12004: C2TE S1
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth putty: approx. 2.5 kg / m2
8 mm tooth putty: approx. 3.2 kg / m2
Maximum consumption: 4.5 kg / m2