- Description
Description
Description
ERADUR® TOPPLACK
Product type
Two-component, solvent-free epoxy coating.
Application areas
Floor coatings with the highest requirements for mechanical properties. Topcoat and sealing for colored sand floors.
Properties:
- Good mechanical properties.
- Low yellowing and good light fastness.
- Very good resistance to inorganic acids, alkali, gasoline, and oils.
A high-quality clear coating formulated for use as a topcoat for coatings with high demands on low yellowing, high light fastness in combination with abrasion resistance and durability. It can also be used for colored sand coatings and gives very good mechanical properties and high impact resistance to the coating. The product emits no odors or flavors and is not flammable.
Application temperature
Application temp (floor temp): 10-30 °C.
Pot life
Pot life after mixing is approximately 50-60 min.
Curing time
24 hours for pedestrians and lower loading. 5-7 days for complete curing and resistance.
Mixing ratios
2 parts by weight of ERADUR TOPPLACK, Comp A (10 kg)
1 part by weight of ERADUR TOPPLACK, Comp B (5 kg)
ERADUR is a two-component product, and an insufficient mixing will result in partially incomplete curing. Mix for several minutes with a machine just before the application, make sure that all material in the bottom and rim of the container is properly mixed.
Keep the exact mixing ratio between component A and B.
All materials should preferably have ambient temperature before use.
Safety
Wear safety goggles and protective clothing during mixing and application. Read the label and safety data sheet before using the product.
Technical specification
Tensile strength ca 45 N/mm2 i.e. fracture in concrete
Flexural strength ca 65 N/mm2
E-module ca 2400 N/mm2
Compressive strength ca 70 N/mm2
Impact resistance ca 50 mJ/mm2
Density base
1,12 gr/cm3
hardener
1,00 gr/cm3
Glass transition temperature ca 42 °C
Viscosity about 0,4 Pa s
Solid content 100%
Gloss Blank
Shelf life 6 months in an unbroken container (>15 °C).
