Concrete Αρχεία - Golvet - Εμπορία Υλικών Δαπέδων https://golvet.gr/en/product-category/concrete/concrete-en/ Δάπεδα παντός τύπου Sat, 05 Feb 2022 11:52:59 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Blaster https://golvet.gr/en/product/blaster/ Tue, 01 Feb 2022 14:12:57 +0000 https://golvet.gr/product/blaster/ The blaster is a special cement which, after mixing with water, develops an enormous expansion pressure of up to 8,000 tonnes / m², which provides silent and safe cracking and demolition of rock and concrete.
NOTE! Complete instructions for use are in the bucket. This should be read before use.

Bucket 5kg

Το άρθρο Blaster εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]>  

 

Το άρθρο Blaster εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Concrete putty https://golvet.gr/en/product/concrete-putty/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2959 Concrete putty is used for leveling and repairing small holes on concrete surfaces. C28 / 35.The putty is used for repair and joint filling of concrete where a relatively high strength is required, e.g. on stairs, garage floors, natural stone and other mineral substrates. The product can be used both indoors and outdoors as well […]

Το άρθρο Concrete putty εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Concrete putty is used for leveling and repairing small holes on concrete surfaces. C28 / 35.The putty is used for repair and joint filling of concrete where a relatively high strength is required, e.g. on stairs, garage floors, natural stone and other mineral substrates. The product can be used both indoors and outdoors as well as on horizontal and vertical surfaces.
Compressive strength class C28 / 35
Water cement number 0.4
Frost resistance Good
Binder Construction cement
Layer thickness 0–10 mm, in holes up to 50 mm
Grain size <0.25 mm Air content 4–6% Water needs 1.5–2.0 liters / 10 kg Material consumption about 2.0 kg / m² / mm Working temperature 10-25 ° C Irrigation yes Mixing time 3–4 min Application time 20 ° C 45–60 min Begins to harden about 60 min Afterwatering 72 tim Color gray Packaging 10 kg

Το άρθρο Concrete putty εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Cement use A https://golvet.gr/en/product/cement-use-a/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2960 Cement mortar A is an “all-round mortar” that is used in, for example, minor repairs on concrete surfaces.Used with mortar consistency for masonry of natural stone and concrete blocks as well as as sludge mortar, thin primer mortar and as repair mortar on concrete in strength class C25 / 30. Can also be used as […]

Το άρθρο Cement use A εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Cement mortar A is an “all-round mortar” that is used in, for example, minor repairs on concrete surfaces.Used with mortar consistency for masonry of natural stone and concrete blocks as well as as sludge mortar, thin primer mortar and as repair mortar on concrete in strength class C25 / 30. Can also be used as a laying mortar for ceramic tiles and for smaller casting work.
Compressive strength class C25 / 30
Water cement number 0.50–0.75
Frost resistance Good
Binder Portlandcement
Layer thickness 10–50 mm
Grain size ≤ 3 mm
Air content about 4-6%
Water needs 2.0–3.0 liters / 20 kg
Material consumption about 2 kg / m² / mm
Working temperature 10-25 ° C
Irrigation No
Mixing time 3–7 min
Application time 20 ° C ca 2 tim
Begins to harden ca 4 tim
Afterwatering 72 tim
Color gray
Packaging 20 kg, 1000 kg, Bulk

Το άρθρο Cement use A εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Combifix https://golvet.gr/en/product/combifix/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2961 Combifix is ​​used for leveling and repairing small holes.The putty is used for repairs to ceilings and walls where the strength requirements are limited. The product is used indoors on substrates of concrete, lightweight concrete, plaster, plasterboard, wood fiber boards, PVC, etc. It can also be used on floors where wear and pressure loads are […]

Το άρθρο Combifix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Combifix is ​​used for leveling and repairing small holes.The putty is used for repairs to ceilings and walls where the strength requirements are limited. The product is used indoors on substrates of concrete, lightweight concrete, plaster, plasterboard, wood fiber boards, PVC, etc. It can also be used on floors where wear and pressure loads are limited.
Compressive strength class about 7 MPa
Water cement number 1.5
Frost resistance No
Binder Standard cement
Layer thickness 1–15 mm, in holes up to 50 mm
Grain size <0.30 mm Air content ca 10% Water needs 3.0 liters / 6 kg Material consumption about 0.6 kg / m² / mm Working temperature 10-25 ° C Irrigation yes Mixing time 3–4 min Application time 20 ° C about 60 min Begins to harden ca 4 tim Color White Packaging 6 kg

Το άρθρο Combifix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Repair use https://golvet.gr/en/product/repair-use/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2962 Repair use is used for repairs on concrete, lightweight concrete, plaster and brick. C20 / 25.The product is used for repairs in layers up to 30 mm and can also be used as a thin plaster in layers of 3–6 mm. The mill can be used both indoors and outdoors. Used for repairs of e.g. […]

Το άρθρο Repair use εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Repair use is used for repairs on concrete, lightweight concrete, plaster and brick. C20 / 25.The product is used for repairs in layers up to 30 mm and can also be used as a thin plaster in layers of 3–6 mm. The mill can be used both indoors and outdoors. Used for repairs of e.g. balconies, stairs, quays, garages, etc. When using lightweight concrete, the manufacturer’s recommendations must be followed.
Compressive strength class C20 / 25
Water cement number about 0.60
Frost resistance Good
Binder Standard cement
Layer thickness 0–30 mm, 3–6 mm for thin sanding
Grain size 1 mm
Air content ca 8%
Water needs 3.4 liters / 20 kg
Material consumption about 1.6 kg / m² / mm
Working temperature 10-25 ° C
Irrigation yes
Mixing time 3–4 min
Application time 20 ° C about 60 min
Begins to harden ca 4 tim
Afterwatering 72 tim
Color Gray
Packaging 20 kg

Το άρθρο Repair use εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Fixing compound Fine https://golvet.gr/en/product/fixing-compound-fine/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2963 Repair compound Fine is used for repairs on concrete, lightweight concrete, plaster and brick. C8 / 10.The product is used for repairs of casting bubbles, casting wounds and joint displacements in layers up to 15 mm where there is no mechanical load. The mill can be used both indoors and outdoors. Used for repairs of […]

Το άρθρο Fixing compound Fine εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Repair compound Fine is used for repairs on concrete, lightweight concrete, plaster and brick. C8 / 10.The product is used for repairs of casting bubbles, casting wounds and joint displacements in layers up to 15 mm where there is no mechanical load. The mill can be used both indoors and outdoors. Used for repairs of eg balconies, stairs, garages, etc. When used on aerated concrete, the manufacturer’s recommendations must be followed.
Compressive strength class C8 / 10
Water cement number about 0.65
Frost resistance Good
Binder Standard cement
Layer thickness 0–15 mm
Grain size ≤ 0.5 mm
Air content ca 8%
Water needs 3.0 liters / 15 kg
Material consumption about 1.6 kg / m² / mm
Working temperature 10-25 ° C
Irrigation yes
Mixing time about 3 min
Application time 20 ° C about 60 min
Begins to harden ca 4 tim
Afterwatering 72 tim
Color gray
Packaging 15 kg

Το άρθρο Fixing compound Fine εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Plinth concrete https://golvet.gr/en/product/plinth-concrete/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2964 Terminal concrete is a mixture-free concrete that is used for lighter castings.The product is used for lighter castings such as posts for fences, mailboxes, drying coils and the like. Note that this is not a structural concrete. NOTE! Casting pipes should not be used. Compressive strength class about 10 MPa Binder Specialcement Grain size ≤ […]

Το άρθρο Plinth concrete εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Terminal concrete is a mixture-free concrete that is used for lighter castings.The product is used for lighter castings such as posts for fences, mailboxes, drying coils and the like. Note that this is not a structural concrete. NOTE! Casting pipes should not be used.
Compressive strength class about 10 MPa
Binder Specialcement
Grain size ≤ 12 mm
Water needs 3.0 liters / 20 kg
Material consumption 20 kg gives about 10 liters
Working temperature 10-25 ° C
Irrigation No
Application time 20 ° C about 2 min
Begins to harden about 2–15 min
Afterwatering 24 tim
Color gray
Packaging 20 kg

Το άρθρο Plinth concrete εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Sättbruk Std 6 https://golvet.gr/en/product/sattbruk-std-6/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2965 Sättbruk Std is used as a laying mill, subfloor for different types of floor products and for minor casting work. C25 / 30.Used as a laying mortar, subfloor for different types of floor products and for minor casting work. Compressive strength class C25 / 30 Water cement number about 0.70 Frost resistance Good Binder Portlandcement […]

Το άρθρο Sättbruk Std 6 εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Sättbruk Std is used as a laying mill, subfloor for different types of floor products and for minor casting work. C25 / 30.Used as a laying mortar, subfloor for different types of floor products and for minor casting work.
Compressive strength class C25 / 30
Water cement number about 0.70
Frost resistance Good
Binder Portlandcement
Layer thickness 10–50 mm
Grain size ≤ 6 mm
Air content ca 4%
Water needs 2.4 liters / 20 kg
Material consumption about 2 kg / m² / mm
Working temperature 10-25 ° C
Irrigation No
Mixing time 3–7 min
Application time 20 ° C ca 2 tim
Begins to harden ca 4 tim
Afterwatering 72 tim
Color gray
Packaging 20 kg, 1000 kg, Bulk

Το άρθρο Sättbruk Std 6 εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Concrete 3 https://golvet.gr/en/product/concrete-3/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2966 Concrete 3 can be used for most types of castings. C35 / 45.Pumpable concrete for various castings and repairs in layers of 12–100 mm. The product has high adhesion to the substrate, and is frost-resistant and diffusion-open, ie. that moisture can penetrate through the repair, but water can not penetrate. Compressive strength class C35 / […]

Το άρθρο Concrete 3 εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Concrete 3 can be used for most types of castings. C35 / 45.Pumpable concrete for various castings and repairs in layers of 12–100 mm. The product has high adhesion to the substrate, and is frost-resistant and diffusion-open, ie. that moisture can penetrate through the repair, but water can not penetrate.
Compressive strength class C35 / 45
Water cement number 0.40–0.50
Frost resistance Very good
Binder Standard cement
Layer thickness 12–100 mm
Grain size ≤ 3 mm
Air content about 6%
Water needs 1.8–2.4 liters / 20 kg
Material consumption about 2 kg / m² / mm
Working temperature 10-25 ° C
Irrigation yes
Mixing time about 5 min
Application time 20 ° C about 60 min
Begins to harden ca 6 tim
Afterwatering 72 tim
Compressive strength 28 days ≥ 45 MPa
Color gray
Packaging 20 kg, 1000 kg

Το άρθρο Concrete 3 εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Concrete 6 https://golvet.gr/en/product/concrete-6/ Tue, 11 Jan 2022 10:00:47 +0000 https://golvet.gr/?post_type=product&p=2967 Concrete 6 can be used for most types of castings. C35 / 45.Pumpable concrete for various castings and repairs in layers of 24–200 mm. The product has high adhesion to the substrate, and is frost-resistant and diffusion-open, ie. that moisture can penetrate through the repair, but water can not penetrate. Compressive strength class C35 / […]

Το άρθρο Concrete 6 εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Concrete 6 can be used for most types of castings. C35 / 45.Pumpable concrete for various castings and repairs in layers of 24–200 mm. The product has high adhesion to the substrate, and is frost-resistant and diffusion-open, ie. that moisture can penetrate through the repair, but water can not penetrate.
Compressive strength class C35 / 45
Water cement number 0.40–0.50
Frost resistance Very good
Binder Standard cement
Layer thickness 24–200 mm
Grain size ≤ 6 mm
Air content about 6%
Water needs 1.8–2.4 liters / 20 kg
Material consumption about 2 kg / m² / mm
Working temperature 10-25 ° C
Irrigation yes
Mixing time about 5 min
Application time 20 ° C about 60 min
Begins to harden ca 6 tim
Afterwatering 72 tim
Compressive strength 28 days ≥ 45 MPa
Color gray
Packaging 20 kg, 1000 kg

Το άρθρο Concrete 6 εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]>