Adhesives Αρχεία - Golvet - Εμπορία Υλικών Δαπέδων https://golvet.gr/en/product-category/waterproofing/adhesives/ Δάπεδα παντός τύπου Thu, 13 Jan 2022 12:04:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.7 FB1200 FlytFix https://golvet.gr/en/product/fb1200-flytfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3050 White cement-based adhesive - Art. No. 1691-0034 15 kg

Το άρθρο FB1200 FlytFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
For installation of all types of granite ceramics and natural stone, with an absorbency of max. 10%, on floors, indoors and outdoors, in dry and wet areas.
Especially suitable for floors with large loads and temperature differences.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed.
Suction pads should be primed with FB5 Primer. Dense substrates are primed with FB8 Primer.

Amount of water:
15 kg of powder is mixed with 2.8-3.2 liters of cold pure water.
Technical data:
Class according to EN 12004: C2F S2
Fire resistance: A1
Open time: approx. 5 hours
Processable: 60 minutes
Can be joined on the floor at 20 ° C: 7-8 hours
Cured: 24 – 30 hours Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material
consumption : 8 mm notched trowel: approx. 3.5 kg / m2
Maximum consumption: 5.5 kg / m2

Το άρθρο FB1200 FlytFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB14 Fast RotFix https://golvet.gr/en/product/fb14-fast-rotfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3051 Cement-based adhesive - Art. No. 1696-0038 15 kg

Το άρθρο FB14 Fast RotFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of application: FB14 Quick RotFix can be used on floors and walls in dry and wet areas when gluing tiles, clinker and granite ceramics. Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings.
Suitable for heated floors. Very good adhesion and rapid strength development.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed.
Suction pads should be primed with FB 5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
15 kg of powder is mixed with 3.9-4.5 liters of cold clean water.

Technical data:
Class according to EN 12004: C2FT S1
Fire resistance: A1
Open time: approx. 30 minutes
Processable: 20 minutes
Can be joined on the floor at 20 ° C: 1-2 hours
Cured: 30 hours Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth putty: approx. 2.5 kg / m2
8 mm tooth putty: approx. 3.5 kg / m2
Max consumption: 4.5 kg / m2

Το άρθρο FB14 Fast RotFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB17 White Adhesive https://golvet.gr/en/product/fb17-white-adhesive/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3052 Dust-reduced white cement-based adhesive - Art. No. 1691-0039 15 kg, Art. No. 1691-0040 5 kg

Το άρθρο FB17 White Adhesive εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. moistening primer should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
15 kg of powder is mixed with 3.9-4.5 liters of cold clean water.
5 kg of powder is mixed with 1.5-1.6 liters of cold clean water.

Technical data:
Class according to EN 12004: C2TE S1
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth putty: approx. 2.5 kg / m2
8 mm tooth putty: approx. 3.2 kg / m2
Maximum consumption: 4.5 kg / m2

Το άρθρο FB17 White Adhesive εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB13 RotFix https://golvet.gr/en/product/fb13-rotfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3053 Gray cement-based adhesive - Art. No. 1691-0035 15 kg, Art. No. 1691-0036 5 kg

Το άρθρο FB13 RotFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​use:
Can be used on floors and walls in dry and wet areas when gluing tiles, tiles and granite ceramics.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings.
Suitable for heated floors. Very good adhesion, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed.
Suction pads should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
12 kg of powder is mixed with 4.8-5.0 liters of cold pure water.
5 kg of powder is mixed with 1.3-1.5 liters of cold clean water.

Technical data:
Class according to EN 12004: C2TE S1
Fire resistance: A1
Open time: approx. 5 hours
Machinable: 30 minutes
Can be jointed on the floor at 20 ° C: 24-36 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption
6 mm notched trowel: approx. 3.1 kg / m2
8 mm notched trowel: approx. 3.6 kg / m2
Maximum consumption: 4 kg / m2

Το άρθρο FB13 RotFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB1700 Super Adhesive https://golvet.gr/en/product/fb1700-super-adhesive/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3054 Dust-reduced white cement-based adhesive - Art. No. 1691-0041 15 kg

Το άρθρο FB1700 Super Adhesive εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings.
Suitable for heated floors. Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed.
Suction pads should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
15 kg of powder is mixed with 3.9-4.5 liters of cold clean water.

Technical data:
Class according to EN 12004: C2TE S2
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption
6 mm notched trowel: approx. 2.5 kg / m2
8 mm notched trowel: approx. 3.2 kg / m2
Maximum consumption: 5 kg / m2

Το άρθρο FB1700 Super Adhesive εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB1350 LättFix https://golvet.gr/en/product/fb1350-lattfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3055 Dust-reduced white cement-based adhesive - Art. No. 1691-0044 10 kg

Το άρθρο FB1350 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. Suction pads should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
10 kg of powder is mixed with 4.0-5.2 liters of cold clean water.

Technical data:
Class according to EN 12004: C1TE S2
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth filler: approx. 1.4 kg / m2
8 mm tooth filler: approx. 2.1 kg / m2
Maximum consumption: 4 kg / m2

Το άρθρο FB1350 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB1300 LättFix https://golvet.gr/en/product/fb1300-lattfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3056 Dust-reduced white cement-based adhesive - Art. No. 1691-0037 12 kg

Το άρθρο FB1300 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. Suction pads should be primed with FB5 Primer.
NOTE According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
12 kg of powder is mixed with 4.8-5.0 liters of cold pure water.

Technical data:
Class according to EN 12004: C2TE S1
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth putty: approx. 1.6 kg / m2
8 mm tooth putty: approx. 2.2 kg / m2
Maximum consumption: 4 kg / m2

Το άρθρο FB1300 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]>