Waterproofing Αρχεία - Golvet - Εμπορία Υλικών Δαπέδων https://golvet.gr/en/product-category/waterproofing/ Δάπεδα παντός τύπου Thu, 27 Jan 2022 12:20:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.7 FB196 & FB197 Sealing Stripes https://golvet.gr/en/product/fb196-fb197-sealing-stripes/ Thu, 27 Jan 2022 12:14:35 +0000 https://golvet.gr/?post_type=product&p=4476 FB196 & FB197 sealing stripes with application in cement mortars.

Various roll lengths.

Το άρθρο FB196 & FB197 Sealing Stripes εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Το άρθρο FB196 & FB197 Sealing Stripes εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Höganäs Silicone Star https://golvet.gr/en/product/hoganas-silicone-star/ Tue, 11 Jan 2022 11:00:11 +0000 https://golvet.gr/?post_type=product&p=3057 Höganäs silicone star - Sanitary silicone for soft joints and sealing

Anti-mold-treated 1-component, acetic acid-curing silicone sealant. Fast curing, elastic with a lot of good aging resistance. The product is anti-mold treated. Meets the requirements according to ISO 11600.

Το άρθρο Höganäs Silicone Star εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application Höganäs Silikon Star:
Sanitary silicone is used in wet areas and where high hygienic requirements are set. Sanitary silicone has good adhesion to ceramic tiles, most sanitary materials, concrete, plaster, wood, enamel, sheet metal, aluminum etc. Do not use the silicone against natural stone as the natural stone may discolour.

The substrate:
The joints must be dry, clean and free of adhesive, dust, dirt, oil and other separating agents that can impair adhesion.

Material consumption:
Approx. 15 m per cartridge at 5 × 5 mm joints.

Material type: Silicone rubber
Consistency: Soft, thixotropic
mass Curing system: Acetoxy
Density: approx. 1.01 g / cm³
Working temperature: + 5 ° C to + 40 ° C – not against frost-coated surfaces
Flammable: No
Properties after application: Non-stick surface approx. 36 minutes
Processing time: 5-8 minutes
Curing: 1-2 mm per day depending
on humidity and temperature
Hardness: approx. 18 ° C Shore A
Modulus of elasticity: approx. 0.4 N / mm2 at 100% elongation
Temperature resistance: -5 ° C to + 150 ° C – short-term up to + 200 ° C
Aging resistance: Very good against UV radiation
Chemical resistance : Very good against most chemicals
Paintable: No

Το άρθρο Höganäs Silicone Star εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> KlinkerFog https://golvet.gr/en/product/klinkerfog/ Tue, 11 Jan 2022 11:00:11 +0000 https://golvet.gr/?post_type=product&p=3058 Tile Joint for joints up to 10 mm - FB225 light gray, FB20 gray, FB200 medium gray, FB23 dark gray

Το άρθρο KlinkerFog εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of application: For joining ceramic tiles on floors and walls, indoors and outdoors in both wet and dry areas. FB Tile Joint can be used for all types of ceramic tiles and natural stone. Especially when you want a rustic joint. Tile joint FB23 contains a strong coloring substance that can be difficult to wash away from unglazed tiles and tiles with a grainy surface.
Therefore, FB23 should not be used for light unglazed slabs and for dry pressed unglazed slabs with a fine or coarse-grained surface. In case of uncertainty, a test joint should be made before the joint is performed. Joint width 3-10 mm.

Substrate: The
joints must be dry, clean and free of adhesive, dust, dirt, oil and other release agents that can
impair adhesion.

Packing:
5 kg and 15 kg

Technical data:
Class according to EN 13888: CG2 WA
Open time: approx. 3 hours
Drying time at 18 ° C
For jointing / light walking traffic: approx. 24 hours
Fully hardened after: 7 days
Minimum working temperature: 5 ° C
Rec. working temperature: 10-20 ° C
Consumption depending on plate size and joint width: 0.7–2.5 kg / m2

Το άρθρο KlinkerFog εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> KakelFog https://golvet.gr/en/product/kakelfog/ Tue, 11 Jan 2022 11:00:11 +0000 https://golvet.gr/?post_type=product&p=3059 Tile Joint for joints up to 5 mm - FB24 white, FB25 light gray, FB27 gray, FB26 dark gray

Το άρθρο KakelFog εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of application: For joining ceramic tiles on floors and walls, indoors and outdoors in both wet and dry areas.
Joint width to 5 mm.

Substrate: The
joints must be dry, clean and free of adhesive, dust, dirt, oil and other release agents that can impair adhesion.

Packing:
3 kg and 15 kg

Το άρθρο KakelFog εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB1700 Super Adhesive https://golvet.gr/en/product/fb1700-super-adhesive/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3054 Dust-reduced white cement-based adhesive - Art. No. 1691-0041 15 kg

Το άρθρο FB1700 Super Adhesive εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings.
Suitable for heated floors. Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed.
Suction pads should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
15 kg of powder is mixed with 3.9-4.5 liters of cold clean water.

Technical data:
Class according to EN 12004: C2TE S2
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption
6 mm notched trowel: approx. 2.5 kg / m2
8 mm notched trowel: approx. 3.2 kg / m2
Maximum consumption: 5 kg / m2

Το άρθρο FB1700 Super Adhesive εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB1350 LättFix https://golvet.gr/en/product/fb1350-lattfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3055 Dust-reduced white cement-based adhesive - Art. No. 1691-0044 10 kg

Το άρθρο FB1350 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. Suction pads should be primed with FB5 Primer.
NOTE! According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
10 kg of powder is mixed with 4.0-5.2 liters of cold clean water.

Technical data:
Class according to EN 12004: C1TE S2
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth filler: approx. 1.4 kg / m2
8 mm tooth filler: approx. 2.1 kg / m2
Maximum consumption: 4 kg / m2

Το άρθρο FB1350 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB1300 LättFix https://golvet.gr/en/product/fb1300-lattfix/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3056 Dust-reduced white cement-based adhesive - Art. No. 1691-0037 12 kg

Το άρθρο FB1300 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Area of ​​application:
Can be used on floors and walls in dry and wet areas when gluing tiles, clinker, granite ceramics, mosaics of glass and natural stone.
Can be used on substrates of, for example, lightweight clinker blocks and concrete older than about 3 months, lightweight concrete, cement plaster, lime cement plaster, gypsum boards and existing tile and clinker coatings. Suitable for heated floors.
Very good adhesion, fast strength development, long assembly time and has a good hanging ability.

The substrate: The
substrate must be load-bearing, solid, cohesive, cleaned of dust, grease and cement sludge. It must be dry enough for FB5 Primer to be absorbed. Suction pads should be primed with FB5 Primer.
NOTE According to the Building Ceramics Council, large tiles must also be coated with 1 mm of adhesive on the back of the tiles, ie a double gluing.

Amount of water:
12 kg of powder is mixed with 4.8-5.0 liters of cold pure water.

Technical data:
Class according to EN 12004: C2TE S1
Fire resistance: A1
Open time: approx. 5 hours
Processable: 30 minutes
Can be joined on the floor at 20 ° C: 10-18 hours
Cured: 7 days Working temperature
: 10-25 ° C
Underfloor heating: Yes
Material consumption:
6 mm tooth putty: approx. 1.6 kg / m2
8 mm tooth putty: approx. 2.2 kg / m2
Maximum consumption: 4 kg / m2

Το άρθρο FB1300 LättFix εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Pipe cuff https://golvet.gr/en/product/pipe-cuff/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3037 FB8-20 ø8-20 mm:
1 hole (Art. No. 1696-0049)
2 holes (Art. No. 1696-0050)

FB22-35 ø22-35 mm:
1 hole (Art. No. 1696-0040)
2 holes (Art. No. 1696-0041)

FB38-50 ø38-50 mm
1 hole (Art. No. 1696-0043)

FB60-70 ø60-70 mm
1 hole (Art. No. 1696-0045)

FB75-90 ø75-90 mm
1 hole (Art. No. 1696-0048)

FB100-120 ø100-120 mm
1 hole (Art. No. 1696-0035)

FB130-160 ø130-160 mm
(Art. No. 1696-0036)

Το άρθρο Pipe cuff εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Available with 1 and 2 holes

Το άρθρο Pipe cuff εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB192 Inner corner & FB193 Outer corner https://golvet.gr/en/product/fb192-inner-corner-fb193-outer-corner/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3038 FB192 Inner corner
(Art. No. 1696-0067)

FB193 Outer corner
(Art. No. 1696-0068)

Το άρθρο FB192 Inner corner & FB193 Outer corner εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Το άρθρο FB192 Inner corner & FB193 Outer corner εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> FB186 Well cuff https://golvet.gr/en/product/fb186-well-cuff/ Tue, 11 Jan 2022 10:58:20 +0000 https://golvet.gr/?post_type=product&p=3039 Well cuff 400 × 400 mm
(Art. No. 1696-0062)

Το άρθρο FB186 Well cuff εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]> Το άρθρο FB186 Well cuff εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

]]>