Substrate:
Metal and tiles are cleaned with acetone, plastic must be roughened up before gluing.
To ensure a fast and complete gluing effect on FB4 Foil and the components, the material or substrate should be moistened with a wet sponge before application.

Packaging:
300 ml cartridge

Technical data:
Density: 1.46 kg / l (20C °)
Minimum application temperature: + 5-40 ° C
Drying time at 23 ° C and 50%
RH Finger dry: 20-40 minutes
Full curing: 3-24 hours

Το άρθρο FB44 tublim εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

The substrate:
Dry and absorbent substrates are primed with FB5 Primer before application of FB 2K Flex. Follow the instructions on the package for FB5 Primer.
FB 2K Flex mix the powder part directly into the liquid while stirring. Use mixer coil for a minimum of 2 minutes until the membrane is lump-free.

Packing:
10 kg & 3.5 kg

Technical data:
Density: 1500 kg / m3
Product properties: EN 14891 CM02P Open
time: 1-2 hours
Drying time at 18 ° C:
Before re-coating: 2-3 hours
Before coating with ceramic: 6 hours
Fully hardened after: 7 days
Recommended working temp: 10-20 ° C
Consumption of commercial kitchens, public bathrooms: 2.5 kg / m2
Consumption of gluing of FB4: 0.65-0.7 kg / m2
Consumption of gluing foil outdoors: 2.5 kg / m2
Consumption of gluing of step sound: 0, 5 kg / m2

Το άρθρο FB 2K Flex εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

Substrate:
Must be dry, firm, clean and durable. Smooth surfaces are roughly sanded or milled. The substrate is primed with FB5.

Packing:
7 kg and 15 kg

Technical data:
Density: 1.4 kg / l
Drying time at 18 ° C before the next application: 1-2 hours
Drying time at 18 ° C before tiling: 12-24 hours
Rec. working temperature: 10-25 ° C
Consumption: 0.5–1 kg

Το άρθρο FB7 Sealing membrane εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

The substrate: The
substrate must be dry, firm, clean and load-bearing. Smooth surfaces are roughly sanded or milled. The substrate is primed with FB5 Primer.

Packing:
6 kg and 12 kg

Technical data:
Density: 1.2 kg / l
Drying time at 18 ° C after first application: approx. 30 minutes
Drying time at 18 ° C after the second application: 30-90 minutes
Suitable working temperature: 10-25 ° C
Consumption: 0.4 kg / m2

Το άρθρο FB6 Vapor barrier εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

The substrate: The
product adheres to most non-absorbent substrates such as steel-smoothed dense concrete, glazed and unglazed ceramics, terrazzo, epoxy, painted surfaces, stainless steel, etc.

Packing:
10 kg

Technical data:
Drying time at 18 ° C and 50% RH
for continued surface treatment: 2-3 hours
Rec. working temperature: 10-25 ° C
Consumption, depending
on substrate: 0.5-0.8 kg / m2

Το άρθρο FB8 Primer εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

The substrate:
Concrete, plaster and similar mineral-bonded substrates as well as wood and plasterboard. The substrate must be firm and free of loose particles. Cavities, cracks and the like must be repaired with waterproof mortar / putty. The substrate must be free of dirt, oil, grease, paint, adhesive residues and the like.

Packing:
1 kg, 7.5 kg and 15 kg

Technical data:
Drying time at 18 ° C before the next surface treatment: 1-3 hours
Suitable working temperature: 10-18 ° C
Consumption diluted: 0.08-0.1 kg / m2
Undiluted: 0.1-0.2 kg / m2

Το άρθρο FB5 Primer εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.

Το άρθρο Pipe cuff εμφανίστηκε πρώτα στο Golvet - Εμπορία Υλικών Δαπέδων.