ERADUR\u00ae WB<\/p>\n
Two-component, water-dilutable, solvent-free epoxy coating.<\/p>\n
Topcoat.
\nAdhesion primer for concrete surfaces before painting, coating etc
\nProperties:
\nAbrasion-resistant and diffusion-open epoxy paint.
\nVery good adhesion to most substrates, even cured epoxy.
\nShort drying and curing time. Cures at 10 \u00b0 C. Withstands early water load.
\nGreat for dust binding.
\nThe colors have very good covering ability.
\nThe product does not emit odors or flavors, and is not flammable.<\/p>\n
Application temp (floor temp): 10-35 \u00b0C. Make sure the ventilation is good.<\/p>\n
Pot life after mixing is approximately 60 min.<\/p>\n
1-4 hours before the application of coating or painting.
\n6-12 hours for pedestrians and lower loading (depending on temperature). 2-4 days for complete curing and resistance.<\/p>\n
1 part by weight of ERADUR WB, Comp A (2,3 kg)
\n3 parts by weight of ERADUR WB, Comp B (7,7 kg)
\nBase and hardener must be mixed very well before dilution with water can be done. Dilute with water while stirring. Depending on the working method, the room temperature and type of surface (floor, ceiling, wall) dilution with approx
\n10% in 1st stroke and 5% in the finishing stroke.
\nERADUR is a two-component product, and an insufficient mixing will result in partially incomplete curing. Mix for several minutes with a machine just before the application, make sure that all material in the bottom and rim of the container is properly mixed.
\nKeep the exact mixing ratio between component A and B.
\nAll materials should preferably have ambient temperature before use.<\/p>\n
Wear safety goggles and protective clothing during mixing and application. Read the label and safety data sheet before using the product.<\/p>\n
Density base: 1,15 gr\/cm3<\/p>\n
1,28 gr\/cm3<\/p>\n
1,25 gr\/cm3
\nViscosity about 0,4 Pa s (after dilution with water)
\nSolid content 50%
\nGloss blank
\nShelf life 6 months in an unbroken container (15 \u00b0C).<\/p>\n","protected":false},"excerpt":{"rendered":"
ERADUR\u00ae WB Product type Two-component, water-dilutable, solvent-free epoxy coating. Application areas Topcoat. Adhesion primer for concrete surfaces before painting, coating etc Properties: Abrasion-resistant and diffusion-open epoxy paint. Very good adhesion to most substrates, even cured epoxy. Short drying and curing time. Cures at 10 \u00b0 C. Withstands early water load. Great for dust binding. The […]<\/p>\n","protected":false},"featured_media":2314,"comment_status":"closed","ping_status":"open","template":"","meta":[],"product_brand":[],"product_cat":[158],"product_tag":[],"class_list":{"0":"post-3665","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-epoxy-floors","8":"first","9":"instock","10":"product-type-simple"},"yoast_head":"\n